[Aide] Aide Digest, Vol 91, Issue 3

Discussion:

Yunker, James M CIV NUWC NWPT

2014-03-14 15:57:45 UTC

Yes, I saw that error some time ago. The reply when I run the command rpm -qa zlib* is :

zlib-1.2.3-29.el6.x86_64
zlib-1.2.3-29.el6.i686
zlib_devel-1.2.3-29.el6.x86_64

I do not have the 32 bit version of zlib-devel-1.2.3-29.el6.i686 installed.

I do not know if aide is 32 or 64 bit.

I am also aware that there is higher number (i.e. a later) version of zlib.

When I install the 64 bit version of zlib where does it go?

I will put that in my path. When I configure aide what part of zlib is it looking for?

Any help appreciated.

Respectfully,

James M. Yunker

-----Original Message-----
From: Aide [mailto:aide-bounces at cs.tut.fi] On Behalf Of aide-request at cs.tut.fi
Sent: Friday, March 14, 2014 10:50 AM
To: aide at cs.tut.fi
Subject: Aide Digest, Vol 91, Issue 3

Send Aide mailing list submissions to
aide at cs.tut.fi

To subscribe or unsubscribe via the World Wide Web, visit
https://mailman.cs.tut.fi/mailman/listinfo/aide
or, via email, send a message with subject or body 'help' to
aide-request at cs.tut.fi

You can reach the person managing the list at
aide-owner at cs.tut.fi

When replying, please edit your Subject line so it is more specific than "Re: Contents of Aide digest..."

Today's Topics:

1. Re: install using centos rpm (Keith Constable)
2. Re: install using centos rpm (Yunker, James M CIV NUWC NWPT)
3. Re: install using centos rpm (Ramon Long)
4. Re: install using centos rpm (Keith Constable)

----------------------------------------------------------------------

Message: 1
Date: Thu, 13 Mar 2014 17:02:17 -0400
From: Keith Constable <kccricket at gmail.com>
To: Aide user mailinglist <aide at cs.tut.fi>
Subject: Re: [Aide] install using centos rpm
Message-ID: <564A15FD-74E3-4586-899E-114415699931 at gmail.com>
Content-Type: text/plain; charset="us-ascii"

James,

Generally speaking, when a package build system complains about a missing library, it is looking for the "-devel" version of it. You may want to check the CentOS packaging system for a zlib-devel and libcrypt-devel or something similar.

Regards,

Keith Constable

./configure --without-mmap
Checking for deflate in : lz ... no
Configure: error: You don't have zlib properly installed. Install it or try --with-out-zlib.
I am using Centos 6.5, 64 bit. I have zlib installed for both 32 and
64 bits. I am not sure what They are saying.
sudo yum install zlib
so it should be okay.
./configure --without-mmap
./configure --without-mmap --without-zlib
checking for mhash get_block_size in -lmhash... no
configure: WARNING : No mhash means no hmac.
checking for gpg_sterror in-lgpg-error ... no configure error: You
need to have libgpg-error.a install to use libcrypt.
Now I am not sure what else to do.
It seems that I should configure with zlib,
It says it is not installed improperly.
I am assuming it is looking for the 64 bit zlib, since my native operating system is Centos 6.5, 64 bit.
I am guessing it is not find zlib and I must direct configure it to find zlib.
I am just not sure if I am even on the correct track or not. It is just not finding zlib.
How do I direct it to find it?
What else can I do?
Any help appreciated.
Thanks in advance.
Respectfully,
James M. Yunker
-----Original Message-----
From: Yunker, James M CIV NUWC NWPT
Sent: Tuesday, March 11, 2014 4:41 PM
To: 'aide at cs.tut.fi'
Subject: install using centos rpm
Caught SIGBUS/SEGV while mmapping. File was truncated while aide was running?
Caught SIGBUS/SEGV. Exiting What is wrong here?
One website on the internet said to configure AIDE without mmaping - except it did not say how to do that or why one should do that?
What does this error mean and how do I fix it?
Thanks.
R,
James M. Yunker
I am using Centos 6.5, 64 bit Linux. I installed and then received this error when it crashed. It has never crated a complete database of my computer.
_______________________________________________
Aide mailing list
Aide at cs.tut.fi
https://mailman.cs.tut.fi/mailman/listinfo/aide

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2849 bytes
Desc: not available
URL: <http://mailman.cs.tut.fi/pipermail/aide/attachments/20140313/0fc6ce5e/attachment-0001.bin>

------------------------------

Message: 2
Date: Fri, 14 Mar 2014 14:05:13 +0000
From: "Yunker, James M CIV NUWC NWPT" <james.yunker at navy.mil>
To: "aide at cs.tut.fi" <aide at cs.tut.fi>
Subject: Re: [Aide] install using centos rpm
Message-ID:
<C835C46A299C2841A1E6CBACEA1BA11B0C113B88 at NAEAPHILXM04V.nadsusea.nads.navy.mil>

Content-Type: text/plain; charset="us-ascii"

I think that I did not make something clear and that I should clear it up immediately.

I started by installing an rpm version of aide.

sudo yum install aide

when I ran aide --init

this is when I got

Caught SIGBUS/SEGV while mmaping. File was truncated while aide was running.
Caught SIGBUS/SEGV. Exiting.

This as I said was from an rpm install of aide.

Now when you said to configure without mmaping, I assumed that you meant to configure Like this,

configure,

make,

make install.

Could you have meant the aide.conf file instead?

Once I received the initial error on my rpm install, I went to the

aide-0.15.1.tar.gz

method of installing aide. I then ran configure, make and make install.

So maybe when you said to use configure without mmaping, you meant the

Aide.conf file?

Is this possible?

Thanks in advance.

Respectfully,

James M. Yunker

-----Original Message-----
From: Yunker, James M CIV NUWC NWPT
Sent: Tuesday, March 11, 2014 4:41 PM
To: 'aide at cs.tut.fi'
Subject: install using centos rpm

While running AIDE the program crashes or terminates after a few minutes with the message shown below:

Code:
Caught SIGBUS/SEGV while mmapping. File was truncated while aide was running?
Caught SIGBUS/SEGV. Exiting What is wrong here?

One website on the internet said to configure AIDE without mmaping - except it did not say how to do that or why one should do that?

What does this error mean and how do I fix it?

Thanks.

R,

James M. Yunker

I am using Centos 6.5, 64 bit Linux. I installed and then received this error when it crashed. It has never crated a complete database of my computer.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5621 bytes
Desc: not available
URL: <http://mailman.cs.tut.fi/pipermail/aide/attachments/20140314/fbaf484a/attachment-0001.bin>

------------------------------

Message: 3
Date: Fri, 14 Mar 2014 15:29:50 +0000
From: Ramon Long <ramon at evolveinc.com>
To: Aide user mailinglist <aide at cs.tut.fi>
Subject: Re: [Aide] install using centos rpm
Message-ID:
<A27D7C694FDA1B448F061FA9244D4D0618A3709A at CORP01.evolveinc.local>
Content-Type: text/plain; charset="us-ascii"

James,

Good morning.

From a SysAdmin perspective you should choose whether to build from source or install from your OS' package management system. If you need to recompile for a particular feature, you should try removing the RPM that you installed.

Regards,

Ramon Long
Director of Information Systems
Evolve, Inc.
Advertising + Marketing + Public Relations
tel: 252.754.2957 ext. 111
ramon at evolveinc.com

-----Original Message-----
From: Aide [mailto:aide-bounces at cs.tut.fi] On Behalf Of Yunker, James M CIV NUWC NWPT
Sent: Friday, March 14, 2014 10:05 AM
To: aide at cs.tut.fi
Subject: Re: [Aide] install using centos rpm

I think that I did not make something clear and that I should clear it up immediately.

I started by installing an rpm version of aide.

sudo yum install aide

when I ran aide --init

this is when I got

Caught SIGBUS/SEGV while mmaping. File was truncated while aide was running.
Caught SIGBUS/SEGV. Exiting.

This as I said was from an rpm install of aide.

Now when you said to configure without mmaping, I assumed that you meant to configure Like this,

configure,

make,

make install.

Could you have meant the aide.conf file instead?

Once I received the initial error on my rpm install, I went to the

aide-0.15.1.tar.gz

method of installing aide. I then ran configure, make and make install.

So maybe when you said to use configure without mmaping, you meant the

Aide.conf file?

Is this possible?

Thanks in advance.

Respectfully,

James M. Yunker

-----Original Message-----
From: Yunker, James M CIV NUWC NWPT
Sent: Tuesday, March 11, 2014 4:41 PM
To: 'aide at cs.tut.fi'
Subject: install using centos rpm

While running AIDE the program crashes or terminates after a few minutes with the message shown below:

Code:
Caught SIGBUS/SEGV while mmapping. File was truncated while aide was running?
Caught SIGBUS/SEGV. Exiting What is wrong here?

One website on the internet said to configure AIDE without mmaping - except it did not say how to do that or why one should do that?

What does this error mean and how do I fix it?

Thanks.

R,

James M. Yunker

I am using Centos 6.5, 64 bit Linux. I installed and then received this error when it crashed. It has never crated a complete database of my computer.

------------------------------

Message: 4
Date: Fri, 14 Mar 2014 10:49:27 -0400
From: Keith Constable <kccricket at gmail.com>
To: Aide user mailinglist <aide at cs.tut.fi>
Subject: Re: [Aide] install using centos rpm
Message-ID: <5213986468551558109 at unknownmsgid>
Content-Type: text/plain; charset="iso-8859-1"

I believe you understood correctly. Allow me to explain more explicitly. When you install a library package with Yum (for example zlib), you generally only get the binary library .so files. This is all you need to run an application linked to those libraries.

However, compiling a package from source requires the source headers (.h files) of the required libraries. These are not packaged in the main RPM for the library, since they are not usually needed. Instead, they are packaged in a "devel" RPM. So I believe to correct your issue with zlib, you can run "yum install zlib-devel". You will need to install the -devel package for any other libraries the configure script complains about.

Regards,

Keith Constable

I think that I did not make something clear and that I should clear it up immediately.
I started by installing an rpm version of aide.
sudo yum install aide
when I ran aide --init
this is when I got
Caught SIGBUS/SEGV while mmaping. File was truncated while aide was running.
Caught SIGBUS/SEGV. Exiting.
This as I said was from an rpm install of aide.
Now when you said to configure without mmaping, I assumed that you
meant to configure Like this,
configure,
make,
make install.
Could you have meant the aide.conf file instead?
Once I received the initial error on my rpm install, I went to the
aide-0.15.1.tar.gz
method of installing aide. I then ran configure, make and make install.
So maybe when you said to use configure without mmaping, you meant the
Aide.conf file?
Is this possible?
Thanks in advance.
Respectfully,
James M. Yunker
-----Original Message-----
From: Yunker, James M CIV NUWC NWPT
Sent: Tuesday, March 11, 2014 4:41 PM
To: 'aide at cs.tut.fi'
Subject: install using centos rpm
Caught SIGBUS/SEGV while mmapping. File was truncated while aide was running?
Caught SIGBUS/SEGV. Exiting What is wrong here?
One website on the internet said to configure AIDE without mmaping - except it did not say how to do that or why one should do that?
What does this error mean and how do I fix it?
Thanks.
R,
James M. Yunker
I am using Centos 6.5, 64 bit Linux. I installed and then received this error when it crashed. It has never crated a complete database of my computer.
_______________________________________________
Aide mailing list
Aide at cs.tut.fi
https://mailman.cs.tut.fi/mailman/listinfo/aide

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2760 bytes
Desc: not available
URL: <http://mailman.cs.tut.fi/pipermail/aide/attachments/20140314/21ceb3f8/attachment.bin>

------------------------------

Subject: Digest Footer

_______________________________________________
Aide mailing list
Aide at cs.tut.fi
https://mailman.cs.tut.fi/mailman/listinfo/aide

------------------------------

End of Aide Digest, Vol 91, Issue 3
***********************************
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5621 bytes
Desc: not available
URL: <http://mailman.cs.tut.fi/pipermail/aide/attachments/20140314/5d73ee57/attachment.bin>

Elia, Leonard F.

2014-03-14 16:25:48 UTC

Permalink

rpm -ql zlib-1.2.3-29.el6.x86_64

will tell you the files and paths

Leonard F. Elia III, CISSP
System Administrator (contractor)
NASA Center for AeroSpace Information Contract
Chugach Federal Solutions, Inc.
757.848.5244 x15 Fax: 757.848.5250

Post by Yunker, James M CIV NUWC NWPT
zlib-1.2.3-29.el6.x86_64
zlib-1.2.3-29.el6.i686
zlib_devel-1.2.3-29.el6.x86_64
I do not have the 32 bit version of zlib-devel-1.2.3-29.el6.i686 installed.
I do not know if aide is 32 or 64 bit.
I am also aware that there is higher number (i.e. a later) version of zlib.
When I install the 64 bit version of zlib where does it go?
I will put that in my path. When I configure aide what part of zlib is it looking for?
Any help appreciated.
Respectfully,
James M. Yunker
-----Original Message-----
From: Aide [mailto:aide-bounces at cs.tut.fi] On Behalf Of aide-request at cs.tut.fi
Sent: Friday, March 14, 2014 10:50 AM
To: aide at cs.tut.fi
Subject: Aide Digest, Vol 91, Issue 3
Send Aide mailing list submissions to
aide at cs.tut.fi
To subscribe or unsubscribe via the World Wide Web, visit
https://mailman.cs.tut.fi/mailman/listinfo/aide
or, via email, send a message with subject or body 'help' to
aide-request at cs.tut.fi
You can reach the person managing the list at
aide-owner at cs.tut.fi
When replying, please edit your Subject line so it is more specific than "Re: Contents of Aide digest..."
1. Re: install using centos rpm (Keith Constable)
2. Re: install using centos rpm (Yunker, James M CIV NUWC NWPT)
3. Re: install using centos rpm (Ramon Long)
4. Re: install using centos rpm (Keith Constable)
----------------------------------------------------------------------
Message: 1
Date: Thu, 13 Mar 2014 17:02:17 -0400
From: Keith Constable <kccricket at gmail.com>
To: Aide user mailinglist <aide at cs.tut.fi>
Subject: Re: [Aide] install using centos rpm
Message-ID: <564A15FD-74E3-4586-899E-114415699931 at gmail.com>
Content-Type: text/plain; charset="us-ascii"
James,
Generally speaking, when a package build system complains about a missing library, it is looking for the "-devel" version of it. You may want to check the CentOS packaging system for a zlib-devel and libcrypt-devel or something similar.
Regards,
Keith Constable

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2849 bytes
Desc: not available
URL: <http://mailman.cs.tut.fi/pipermail/aide/attachments/20140313/0fc6ce5e/attachment-0001.bin>
------------------------------
Message: 2
Date: Fri, 14 Mar 2014 14:05:13 +0000
From: "Yunker, James M CIV NUWC NWPT" <james.yunker at navy.mil>
To: "aide at cs.tut.fi" <aide at cs.tut.fi>
Subject: Re: [Aide] install using centos rpm
<C835C46A299C2841A1E6CBACEA1BA11B0C113B88 at NAEAPHILXM04V.nadsusea.nads.navy.mil>
Content-Type: text/plain; charset="us-ascii"
I think that I did not make something clear and that I should clear it up immediately.
I started by installing an rpm version of aide.
sudo yum install aide
when I ran aide --init
this is when I got
Caught SIGBUS/SEGV while mmaping. File was truncated while aide was running.
Caught SIGBUS/SEGV. Exiting.
This as I said was from an rpm install of aide.
Now when you said to configure without mmaping, I assumed that you meant to configure Like this,
configure,
make,
make install.
Could you have meant the aide.conf file instead?
Once I received the initial error on my rpm install, I went to the
aide-0.15.1.tar.gz
method of installing aide. I then ran configure, make and make install.
So maybe when you said to use configure without mmaping, you meant the
Aide.conf file?
Is this possible?
Thanks in advance.
Respectfully,
James M. Yunker
-----Original Message-----
From: Yunker, James M CIV NUWC NWPT
Sent: Tuesday, March 11, 2014 4:41 PM
To: 'aide at cs.tut.fi'
Subject: install using centos rpm
Caught SIGBUS/SEGV while mmapping. File was truncated while aide was running?
Caught SIGBUS/SEGV. Exiting What is wrong here?
One website on the internet said to configure AIDE without mmaping - except it did not say how to do that or why one should do that?
What does this error mean and how do I fix it?
Thanks.
R,
James M. Yunker
I am using Centos 6.5, 64 bit Linux. I installed and then received this error when it crashed. It has never crated a complete database of my computer.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5621 bytes
Desc: not available
URL: <http://mailman.cs.tut.fi/pipermail/aide/attachments/20140314/fbaf484a/attachment-0001.bin>
------------------------------
Message: 3
Date: Fri, 14 Mar 2014 15:29:50 +0000
From: Ramon Long <ramon at evolveinc.com>
To: Aide user mailinglist <aide at cs.tut.fi>
Subject: Re: [Aide] install using centos rpm
<A27D7C694FDA1B448F061FA9244D4D0618A3709A at CORP01.evolveinc.local>
Content-Type: text/plain; charset="us-ascii"
James,
Good morning.

Regards,
Ramon Long
Director of Information Systems
Evolve, Inc.
Advertising + Marketing + Public Relations
tel: 252.754.2957 ext. 111
ramon at evolveinc.com
-----Original Message-----
From: Aide [mailto:aide-bounces at cs.tut.fi] On Behalf Of Yunker, James M CIV NUWC NWPT
Sent: Friday, March 14, 2014 10:05 AM
To: aide at cs.tut.fi
Subject: Re: [Aide] install using centos rpm
I think that I did not make something clear and that I should clear it up immediately.
I started by installing an rpm version of aide.
sudo yum install aide
when I ran aide --init
this is when I got
Caught SIGBUS/SEGV while mmaping. File was truncated while aide was running.
Caught SIGBUS/SEGV. Exiting.
This as I said was from an rpm install of aide.
Now when you said to configure without mmaping, I assumed that you meant to configure Like this,
configure,
make,
make install.
Could you have meant the aide.conf file instead?
Once I received the initial error on my rpm install, I went to the
aide-0.15.1.tar.gz
method of installing aide. I then ran configure, make and make install.
So maybe when you said to use configure without mmaping, you meant the
Aide.conf file?
Is this possible?
Thanks in advance.
Respectfully,
James M. Yunker
-----Original Message-----
From: Yunker, James M CIV NUWC NWPT
Sent: Tuesday, March 11, 2014 4:41 PM
To: 'aide at cs.tut.fi'
Subject: install using centos rpm
Caught SIGBUS/SEGV while mmapping. File was truncated while aide was running?
Caught SIGBUS/SEGV. Exiting What is wrong here?
One website on the internet said to configure AIDE without mmaping - except it did not say how to do that or why one should do that?
What does this error mean and how do I fix it?
Thanks.
R,
James M. Yunker
I am using Centos 6.5, 64 bit Linux. I installed and then received this error when it crashed. It has never crated a complete database of my computer.
------------------------------
Message: 4
Date: Fri, 14 Mar 2014 10:49:27 -0400
From: Keith Constable <kccricket at gmail.com>
To: Aide user mailinglist <aide at cs.tut.fi>
Subject: Re: [Aide] install using centos rpm
Message-ID: <5213986468551558109 at unknownmsgid>
Content-Type: text/plain; charset="iso-8859-1"
I believe you understood correctly. Allow me to explain more explicitly. When you install a library package with Yum (for example zlib), you generally only get the binary library .so files. This is all you need to run an application linked to those libraries.
However, compiling a package from source requires the source headers (.h files) of the required libraries. These are not packaged in the main RPM for the library, since they are not usually needed. Instead, they are packaged in a "devel" RPM. So I believe to correct your issue with zlib, you can run "yum install zlib-devel". You will need to install the -devel package for any other libraries the configure script complains about.
Regards,
Keith Constable

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2760 bytes
Desc: not available
URL: <http://mailman.cs.tut.fi/pipermail/aide/attachments/20140314/21ceb3f8/attachment.bin>
------------------------------
Subject: Digest Footer
_______________________________________________
Aide mailing list
Aide at cs.tut.fi
https://mailman.cs.tut.fi/mailman/listinfo/aide
------------------------------
End of Aide Digest, Vol 91, Issue 3
***********************************
_______________________________________________
Aide mailing list
Aide at cs.tut.fi
https://mailman.cs.tut.fi/mailman/listinfo/aide

Yunker, James M CIV NUWC NWPT

2014-03-14 16:51:13 UTC

Permalink

There is some output in my aide.log

The top line reads:

Error on exit of child prelink process

And the internet talks about disabling prelink

at

/etc/prelink.conf

It is a fedora error.

This in addition to the two lines that I already reported. How do I disable prelink at prelink.conf?

Thanks.

Respectfully,

James M. Yunker
-----Original Message-----
From: Aide [mailto:aide-bounces at cs.tut.fi] On Behalf Of aide-request at cs.tut.fi
Sent: Friday, March 14, 2014 10:50 AM
To: aide at cs.tut.fi
Subject: Aide Digest, Vol 91, Issue 3

Send Aide mailing list submissions to
aide at cs.tut.fi

To subscribe or unsubscribe via the World Wide Web, visit
https://mailman.cs.tut.fi/mailman/listinfo/aide
or, via email, send a message with subject or body 'help' to
aide-request at cs.tut.fi

You can reach the person managing the list at
aide-owner at cs.tut.fi

When replying, please edit your Subject line so it is more specific than "Re: Contents of Aide digest..."

Today's Topics:

1. Re: install using centos rpm (Keith Constable)
2. Re: install using centos rpm (Yunker, James M CIV NUWC NWPT)
3. Re: install using centos rpm (Ramon Long)
4. Re: install using centos rpm (Keith Constable)

----------------------------------------------------------------------

Message: 1
Date: Thu, 13 Mar 2014 17:02:17 -0400
From: Keith Constable <kccricket at gmail.com>
To: Aide user mailinglist <aide at cs.tut.fi>
Subject: Re: [Aide] install using centos rpm
Message-ID: <564A15FD-74E3-4586-899E-114415699931 at gmail.com>
Content-Type: text/plain; charset="us-ascii"

James,

Generally speaking, when a package build system complains about a missing library, it is looking for the "-devel" version of it. You may want to check the CentOS packaging system for a zlib-devel and libcrypt-devel or something similar.

Regards,

Keith Constable